avnet rfsoc explorer -凯发k8网页登录

avnet rfsoc explorer

版本 2.3.1 (90.4 mb) 作者:
connect to xilinx ultrascale rfsoc gigasample data converters. perform analysis in matlab and simulink. deploy algorithms with hdl coder.

1.8k 次下载

更新时间 2023/3/16

查看许可证

connect to amd rfsoc using matlab and simulink
avnet rfsoc explorer® provides a visual interface to amd zynq® ultrascale ™ rfsoc using matlab and simulink. an intuitive api enables programmatic control of all rf-adc and rf-dac parameters, signal generation, acquisition. system designers who want to test ota signals can use avnet rfsoc explorer to control supported rf front-end cards for popular amd rfsoc evaluation kits. algorithm designers can generate ip cores for execution on rfsoc platforms.
support and documentation
characterize rfsoc performance
development with amd zynq ultrascale rfsoc starts by characterizing the data converter subsystem using avnet rfsoc explorer. avnet rfsoc explorer enables you to use matlab and simulink to stream standards-compliant 5g, lte, and custom waveforms to and from hardware.
perform over-the-air tests with rf front-end cards
avnet rfsoc explorer enables ota testing by integrating control of rf front-ends connected to amd zynq ultrascale rfsoc gen1 and gen3 evaluation kits. explore the entire signal chain in lte 1800 mhz band-3 and mmwave bands between 19 and 31 ghz.
supported platforms for rfsoc characterization and ota test:
    write test scripts easily with api and auto-complete
    quickly write scripts that programmatically control of all rfsoc data converter parameters and rf add-on card signal chains. auto-complete suggests commands and arguments to help you efficiently use the api.
    import spreadsheet presets for automated testing
    use the spreadsheet import capability (file > open) to load sequenced presets into avnet rfsoc explorer and run comprehensive and repeatable test suites.
    deploy hdl code for rfsoc
    when you move into algorithm development, avnet rfsoc explorer support for hdl coder™ enables generation of ip cores that can integrate into rfsoc devices using amd vivado® design suite.
    supported platforms for hdl code generation:
      with this support package you can generate hdl code and port mappings to i/o and axi registers to build connections to rf tiles and ddr memory, and interactively control the fpga design from matlab.

      引用格式

      avnet (2023). avnet rfsoc explorer (https://www.mathworks.com/matlabcentral/fileexchange/73665-avnet-rfsoc-explorer), matlab central file exchange. 检索来源 .

      matlab 版本兼容性
      创建方式 r2022b
      兼容 r2022a 到 r2022b 的版本
      平台兼容性
      windows macos linux
      类别
      • > >
      • >
      • >
      在 和 中查找有关 5g toolbox 的更多信息
      标签
      致谢

      参考作品: , ,

      community treasure hunt

      find the treasures in matlab central and discover how the community can help you!

      start hunting!
      版本 已发布 发行说明
      2.3.1

      bug fixes
      fixed api 'openfile' fixed
      reliable lock of clk104 and downstream plls

      2.3.0

      supports r2022a, r2022b
      enhanced dac output plotting in imr duc modes for frequency planning
      api cmd: avnet_rfsoc_explorer('getdtrx2hw') reads settings from otava dtrx2 card
      api cmd: avnet_rfsoc_explorer('openfile') loads parameters from spreadsheet

      2.2.0

      supported matlab versions: r2022a, r2021b
      import settings from spreadsheet using file > open
      api cmd: avnet_rfsoc_explorer('adc_setdsa')
      api cmd: avnet_rfsoc_explorer('dac_setvop')
      auto-complete when typing api commands
      run app from any directory

      2.1.0

      support for two most recent matlab versions: r2021a, r2021b.
      save adc data for multiple channels & multiple captures.
      new api cmds.
      multiple bug fixes, including issue with duplicate/shadowed paths.

      2.0.1

      fixes an error reported, related to a missing graphics file.

      2.0

      api programmatic control of all rf-adc and rf-dac parameters, signal generation, acquisition
      support for xilinx rfsoc gen3 on the xilinx zcu208 platform
      support for avnet wideband mmwave radio development kit for rfsoc gen-3
      multiple bug fixes

      1.1.0

      minor release v1.1.0 adds 2 features:
      - enables global programming of dac output current
      - copies adc sample buffer to base workspace

      1.0.3

      added link to free matlab wireless trial package and acknowledgment to communications toolbox™ support package for xilinx® zynq®-based radio

      1.0.2

      minor typographical corrections

      1.0.1

      revised description and project website url.

      1.0
      网站地图