quantize a deep neural network to 8-凯发k8网页登录

to explore the behavior of a neural network with quantized convolution layers, use the deep network quantizer app. this example quantizes the learnable parameters of the convolution layers of the squeezenet neural network after retraining the network to classify new images according to the example.

this example uses a dag network with the gpu execution environment.

load the network to quantize into the base workspace.

load squeezenetmerch
net

net = 
  dagnetwork with properties:
         layers: [68×1 nnet.cnn.layer.layer]
    connections: [75×2 table]
     inputnames: {'data'}
    outputnames: {'new_classoutput'}

define calibration and validation data.

the app uses calibration data to exercise the network and collect the dynamic ranges of the weights and biases in the convolution and fully connected layers of the network and the dynamic ranges of the activations in all layers of the network. for the best quantization results, the calibration data must be representative of inputs to the network.

the app uses the validation data to test the network after quantization to understand the effects of the limited range and precision of the quantized learnable parameters of the convolution layers in the network.

in this example, use the images in the merchdata data set. define an augmentedimagedatastore object to resize the data for the network. then, split the data into calibration and validation data sets.

unzip('merchdata.zip');
imds = imagedatastore('merchdata', ...
    'includesubfolders',true, ...
    'labelsource','foldernames');
[caldata, valdata] = spliteachlabel(imds, 0.7, 'randomized');
aug_caldata = augmentedimagedatastore([227 227], caldata);
aug_valdata = augmentedimagedatastore([227 227], valdata);

at the matlab command prompt, open the app.

deepnetworkquantizer

in the app, click new and select quantize a network.

the app verifies your execution environment. for more information, see .

in the dialog, select the execution environment and the network to quantize from the base workspace. for this example, select a gpu execution environment and the dag network, net.

the app displays the layer graph of the selected network.

in the calibrate section of the toolstrip, under calibration data, select the augmentedimagedatastore object from the base workspace containing the calibration data, aug_caldata. select calibrate.

the deep network quantizer uses the calibration data to exercise the network and collect range information for the learnable parameters in the network layers.

when the calibration is complete, the app displays a table containing the weights and biases in the convolution and fully connected layers of the network and the dynamic ranges of the activations in all layers of the network and their minimum and maximum values during the calibration. to the right of the table, the app displays histograms of the dynamic ranges of the parameters. the gray regions of the histograms indicate data that cannot be represented by the quantized representation. for more information on how to interpret these histograms, see quantization of deep neural networks.

in the quantize column of the table, indicate whether to quantize the learnable parameters in the layer. layers that are not quantized remain in single-precision after quantization.

in the validate section of the toolstrip, under validation data, select the augmentedimagedatastore object from the base workspace containing the validation data, aug_valdata.

in the validate section of the toolstrip, under quantization options, select the default metric function and minmax exponent scheme. select quantize and validate.

the deep network quantizer quantizes the weights, activations, and biases of convolution layers in the network to scaled 8-bit integer data types and uses the validation data to exercise the network. the app determines a default metric function to use for the validation based on the type of network that is being quantized. for a classification network, the app uses top-1 accuracy.

when the validation is complete, the app displays the results of the validation, including:

if you want to use a different metric function for validation, for example to use the top-5 accuracy metric function instead of the default top-1 accuracy metric function, you can define a custom metric function. save this function in a local file.

function accuracy = hcomputemodelaccuracy(predictionscores, net, datastore)
%% computes model-level accuracy statistics
    
    % load ground truth
    tmp = readall(datastore);
    groundtruth = tmp.response;
    
    % compare with predicted label with actual ground truth 
    predictionerror = {};
    for idx=1:numel(groundtruth)
        [~, idy] = max(predictionscores(idx,:)); 
        yactual = net.layers(end).classes(idy);
        predictionerror{end 1} = (yactual == groundtruth(idx)); %#ok
    end
    
    % sum all prediction errors.
    predictionerror = [predictionerror{:}];
    accuracy = sum(predictionerror)/numel(predictionerror);
end

to revalidate the network using this custom metric function, under quantization options, enter the name of the custom metric function, hcomputemodelaccuracy. select add to add hcomputemodelaccuracy to the list of metric functions available in the app. select hcomputemodelaccuracy as the metric function to use.

the custom metric function must be on the path. if the metric function is not on the path, this step will produce an error.

select quantize and validate.

the app quantizes the network and displays the validation results for the custom metric function.

the app displays only scalar values in the validation results table. to view the validation results for a custom metric function with non-scalar output, export the dlquantizer object as described below, then validate using the function at the matlab command window.

if the performance of the quantized network is not satisfactory, you can choose to not quantize some layers by deselecting the layer in the table. you can also explore the effects of choosing a different exponent selection scheme for quantization in the quantization options menu. to see the effects of these changes, select quantize and validate again.

after calibrating the network, you can choose to export the quantized network or the dlquantizer object. select the export button. in the drop down, select from the following options:

to explore the behavior of a neural network with quantized convolution layers, use the deep network quantizer app. this example quantizes the learnable parameters of the convolution layers of the squeezenet neural network after retraining the network to classify new images according to the example.

this example uses a dag network with the cpu execution environment.

load the network to quantize into the base workspace.

load squeezenetmerch
net

net = 
  dagnetwork with properties:
         layers: [68×1 nnet.cnn.layer.layer]
    connections: [75×2 table]
     inputnames: {'data'}
    outputnames: {'new_classoutput'}

define calibration and validation data.

the app uses calibration data to exercise the network and collect the dynamic ranges of the weights and biases in the convolution and fully connected layers of the network and the dynamic ranges of the activations in all layers of the network. for the best quantization results, the calibration data must be representative of inputs to the network.

the app uses the validation data to test the network after quantization to understand the effects of the limited range and precision of the quantized learnable parameters of the convolution layers in the network.

in this example, use the images in the merchdata data set. define an augmentedimagedatastore object to resize the data for the network. then, split the data into calibration and validation data sets.

unzip('merchdata.zip');
imds = imagedatastore('merchdata', ...
    'includesubfolders',true, ...
    'labelsource','foldernames');
[caldata, valdata] = spliteachlabel(imds, 0.7, 'randomized');
aug_caldata = augmentedimagedatastore([227 227], caldata);
aug_valdata = augmentedimagedatastore([227 227], valdata);

at the matlab command prompt, open the app.

deepnetworkquantizer

in the app, click new and select quantize a network.

the app verifies your execution environment. for more information, see .

in the dialog, select the execution environment and the network to quantize from the base workspace. for this example, select a cpu execution environment and the dag network, net.

the app displays the layer graph of the selected network.

in the calibrate section of the toolstrip, under calibration data, select the augmentedimagedatastore object from the base workspace containing the calibration data, aug_caldata. select calibrate.

the deep network quantizer uses the calibration data to exercise the network and collect range information for the learnable parameters in the network layers.

when the calibration is complete, the app displays a table containing the weights and biases in the convolution and fully connected layers of the network and the dynamic ranges of the activations in all layers of the network and their minimum and maximum values during the calibration. to the right of the table, the app displays histograms of the dynamic ranges of the parameters. the gray regions of the histograms indicate data that cannot be represented by the quantized representation. for more information on how to interpret these histograms, see quantization of deep neural networks.

in the quantize column of the table, indicate whether to quantize the learnable parameters in the layer. layers that are not quantized remain in single-precision after quantization.

in the validate section of the toolstrip, under validation data, select the augmentedimagedatastore object from the base workspace containing the validation data, aug_valdata.

in the validate section of the toolstrip, under hardware settings, select raspberry pi as the simulation environment. the app auto-populates the target credentials from an existing connection or from the last successful connection. you can also use this option to create a new raspberry pi connection.

in the validate section of the toolstrip, under quantization options, select the default metric function and minmax exponent scheme. select quantize and validate.

the deep network quantizer quantizes the weights, activations, and biases of convolution layers in the network to scaled 8-bit integer data types and uses the validation data to exercise the network. the app determines a default metric function to use for the validation based on the type of network that is being quantized. for a classification network, the app uses top-1 accuracy.

when the validation is complete, the app displays the results of the validation, including:

if the performance of the quantized network is not satisfactory, you can choose to not quantize some layers by deselecting the layer in the table. you can also explore the effects of choosing a different exponent selection scheme for quantization in the quantization options menu. to see the effects of these changes, select quantize and validate again.

after calibrating the network, you can choose to export the quantized network or the dlquantizer object. select the export button. in the drop down, select from the following options:

to explore the behavior of a neural network that has quantized convolution layers, use the deep network quantizer app. this example quantizes the learnable parameters of the convolution layers of the logonet neural network for an fpga target.

for this example, you need the products listed under fpga in .

function net = getlogonetwork
 if ~isfile('logonet.mat')
        url = 'https://www.mathworks.com/supportfiles/gpucoder/cnn_models/logo_detection/logonet.mat';
        websave('logonet.mat',url);
    end
    data = load('logonet.mat');
    net  = data.convnet;
end

snet = getlogonetwork;

snet = 
  seriesnetwork with properties:
         layers: [22×1 nnet.cnn.layer.layer]
     inputnames: {'imageinput'}
    outputnames: {'classoutput'}

currentdir = pwd;
openexample('deeplearning_shared/quantizenetworkforfpgadeploymentexample')
unzip('logos_dataset.zip');
imds = imagedatastore(fullfile(currentdir,'logos_dataset'),...
 'includesubfolders',true,'fileextensions','.jpg','labelsource','foldernames');
[caldata,valdata] = spliteachlabel(imds,0.7,'randomized');
caldata_concise = caldata.subset(1:20);
valdata_concise = valdata.subset(1:6);

deepnetworkquantizer

this example shows you how to import a dlquantizer object from the base workspace into the deep network quantizer app. this allows you to begin quantization of a deep neural network using the command line or the app, and resume your work later in the app.

deepnetworkquantizer