import geometry from stl or step file

syntax

gm = importgeometry(geometryfile)

gm = importgeometry(model,geometryfile)

importgeometry(model,___)

___ = importgeometry(___,"maxrelativedeviation",d)

description

gm = importgeometry(geometryfile) creates a geometry object from the specified stl or step geometry file. a geometry imported from an stl file can be 3-d or planar. a geometry imported from a step file must be 3-d.

gm = importgeometry(model,geometryfile) also includes the geometry in the model container.

example

importgeometry(model,___) creates a geometry object from the specified stl or step geometry file and includes the geometry in the model container.

example

___ = importgeometry(___,"maxrelativedeviation",d) lets you control the accuracy of the geometry import from a step file by specifying the relative sag. use this syntax with any of the argument combinations from the previous syntaxes.

examples

import 3-d geometry from stl file without creating model

create a geometry object from an stl geometry file.

gm = importgeometry("forearmlink.stl");

plot the geometry.

pdegplot(gm)

figure contains an axes object. the axes object contains 3 objects of type quiver, patch, line.

import planar geometry from stl file into model

import a planar stl geometry and include it in a pde model. when importing a planar geometry, importgeometry converts it to a 2-d geometry by mapping it to the xy-plane.

create a pdemodel container.

model = createpde;

import a geometry into the container.

importgeometry(model,"plateholeplanar.stl")

ans = 
  discretegeometry with properties:
       numcells: 0
       numfaces: 1
       numedges: 5
    numvertices: 5
       vertices: [5x3 double]

plot the geometry with the edge labels.

pdegplot(model,"edgelabels","on")

figure contains an axes object. the axes object contains an object of type line.

import 3-d geometry from step file

create a geometry object from a step geometry file.

gm = importgeometry("blockwithhole.step");

plot the geometry.

pdegplot(gm,"facealpha",0.3)

figure contains an axes object. the axes object contains 3 objects of type quiver, patch, line.

now import the same geometry while specifying the relative sag. you can use this parameter to control the accuracy of the geometry import.

gm = importgeometry("blockwithhole.step","maxrelativedeviation",10);

plot the geometry.

figure
pdegplot(gm,"facealpha",0.3)

figure contains an axes object. the axes object contains 3 objects of type quiver, patch, line.

input arguments

`model` — model container
`pdemodel` object | `thermalmodel` object | `structuralmodel` object | `electromagneticmodel` object

model container, specified as a pdemodel object, thermalmodel object, structuralmodel object, or electromagneticmodel object.

example: model = createpde(3)

example: thermalmodel = createpde(thermal="steadystate")

example: structuralmodel = createpde(structural="static-solid")

example: emagmodel = createpde(electromagnetic="electrostatic")

`geometryfile` — path to stl or step file
string scalar | character vector

path to stl or step file, specified as a string scalar or a character vector ending with the file extension ".stl", ".stp", or ".step". use can also use the uppercase extensions ".stl", ".stp" or ".step", or any combinations of uppercase and lowercase letters in these extensions.

example: "../geometries/carburetor.stl"

data types: string | char

`d` — relative sag
1 (default) | number in the range [0.1, 10]

relative sag for importing a step geometry, specified as a number in the range [0.1, 10]. a relative sag is the ratio between the local absolute sag and the local mesh edge length. the absolute sag is the maximal gap between the mesh and the geometry.

gap between the curved geometry edge and the straight mesh edge represents the local absolute sag.

example: gm = importgeometry("angleblock.step","maxrelativedeviation",5)

data types: double

output arguments

`gm` — geometry
`discretegeometry` object

geometry, returned as a discretegeometry object. see for details.

limitations

importgeometry does not allow you to import a multidomain 2-d or 3-d geometry where subdomains have any common points. if the subdomains of the geometry have common points, the toolbox still treats these subdomains as disconnected, without any common interface between them. each subdomain has its own mesh.
because of this limitation, you cannot import nested 3-d geometries directly. as a workaround, you can import a mesh and then create a multidomain geometry from the mesh by using the geometryfrommesh function. see .

tips

the stl format approximates the boundary of a cad geometry by using a collection of triangles, and the importgeometry function reconstructs the faces and edges from this data. reconstruction from stl data is not precise and can result in a loss of edges and, therefore, the merging of adjacent faces. typically, lost edges are the edges between two adjacent faces meeting at a small angle, or smooth edges bounding blend surfaces. usually, the loss of such edges does not affect the analysis workflow.
because stl geometries are only approximations of the original cad geometries, the areas and volumes of the stl and cad geometries can differ.

version history

introduced in r2015a

r2022b: import from step files

you can now import a geometry from a step file. when importing from a step file, you can control the accuracy of the geometry import by specifying the relative sag value.

r2021a: import without creating a model

you can now create a geometry object from an stl geometry file without attaching the imported geometry to any model. the new syntax is g = importgeometry('geometryfile.stl').

r2017b: import and mesh planar stl geometries

you can now import a planar stl geometry and convert it to a 2-d geometry by mapping it to the xy-plane.

r2016b: improved quality of stl import

when importing an stl geometry for a 3-d problem, the function can now recognize and reconstruct more geometric vertices, edges, and faces of the original cad geometry in some instances. in these cases, the resulting geometry is a closer match to the original cad geometry.

detailed geometries can now contain more faces and edges than in previous releases. as a result, in rare instances, the new faces and edges can cause renumbering of the existing ones. if your code imports an stl geometry, visually check the geometry to ensure that you are assigning boundary and initial conditions to the intended regions.

import geometry from stl or step file -凯发k8网页登录

syntax

description

examples

import 3-d geometry from stl file without creating model

import planar geometry from stl file into model

import 3-d geometry from step file

input arguments

`model` — model container
`pdemodel` object | `thermalmodel` object | `structuralmodel` object | `electromagneticmodel` object

`geometryfile` — path to stl or step file
string scalar | character vector

`d` — relative sag
1 (default) | number in the range [0.1, 10]

output arguments

`gm` — geometry
`discretegeometry` object

limitations

tips

version history

r2022b: import from step files

r2021a: import without creating a model

r2017b: import and mesh planar stl geometries

r2016b: improved quality of stl import

see also

topics

import geometry from stl or step file -凯发k8网页登录

syntax

description

examples

import 3-d geometry from stl file without creating model

import planar geometry from stl file into model

import 3-d geometry from step file

input arguments

model — model container pdemodel object | thermalmodel object | structuralmodel object | electromagneticmodel object

geometryfile — path to stl or step file string scalar | character vector

d — relative sag 1 (default) | number in the range [0.1, 10]

output arguments

gm — geometry discretegeometry object

limitations

tips

version history

r2022b: import from step files

r2021a: import without creating a model

r2017b: import and mesh planar stl geometries

r2016b: improved quality of stl import

see also

topics

wechat

`model` — model container
`pdemodel` object | `thermalmodel` object | `structuralmodel` object | `electromagneticmodel` object

`geometryfile` — path to stl or step file
string scalar | character vector

`d` — relative sag
1 (default) | number in the range [0.1, 10]

`gm` — geometry
`discretegeometry` object